Never miss a firmware upgrade again! Sign up below to receive email updates every time new firmware or software is released >

Before downloading firmware the Video VBOX unit must be registered. This can be done here.

These upgrade files support all types of Video VBOX units.

If you update the firmware in your VVB unit, please also update Video VBOX Setup software.

Which update files do you need to use?

* If you are running Version 2 firmware – you need to use the ‘watershed’ upgrade.
This will update your unit to Version 3 and install firmware V3.0.30.

* If you are running Version 3 firmware – you need to use the ‘firmware only’ upgrade.

Don’t know what version of firmware you are running? Check Help>About in Video VBOX Setup Software, or open a recent VBO file in notepad and look under the 'comments' section.

* Customers who use NTSC cameras may find that after running the ‘watershed’ upgrade file, their VVB will not accept NTSC scene files. If this is the case, run the NTSC update to correct the unit type. 
Don't know if you are using NTSC or PAL cameras? See here for more info. 

Note - once the ‘watershed’ file has been used, you will never need to use it again. The Video VBOX will reject the upgrade if you try to run it more than once. For future upgrades, use the ‘firmware only’ files.

How do you run the update?

All VVB updates work in the same way. When you have downloaded the update file, place this on the root directory of an SD card and load the card into the VVB. The unit will then upgrade - it will beep when the upgrade is finished. After each upgrade is carried out you must power cycle the unit. If you are running two updates please remember to power cycle the box in-between upgrades. Failure to do so may result in incorrect operation of the VVB.

Video Loggers

		Version	Date
Video VBOX V2 to V3*	'Watershed' V2 to V3*	V3 Upgrade*	10/2011
Video VBOX Firmware	Version 3 Firmware only	V3.0.42	03/2012
NTSC Upgrade	Change unit type to NTSC	NTSC	09/2011

*Learn more about the new V3 features by watching the presentation below>

Displays

		Version	Date
OLED Display	OLED display for use with VBOX	v1.8 b0003	01/2012

New V3 features

Now incorporating an auto track map element based on your current GPS location, multi-scene support enabling you to upload and store multiple scenes, and a host of new lap timing features, V3 will revolutionize the way you use your Video VBOX.

Learn more about the new V3 features by watching the presentation on your right>